Custom Wrought Iron Gates, Railings & Metal Sculptures
Master Artistic Blacksmiths since 2005

Custom Wrought Iron Gates, Railings & Metal Sculptures

Master Artistic Blacksmiths since 2005

PL EN

Wrought Iron Fence in Manor Style (BP54)

BP54 is a very massive fence for a residence.

Massive manor-style wrought iron fence with riveted lattice, gilded crest and openwork post on a brick base
Manor-style wrought iron fence BP54 with a scrolled crest above hydrangeas on a dark brick wall
Two spans of fence BP54 with an openwork post, riveted lattice base and coat of arms
Manor entrance with openwork towers, a lattice canopy and the fence BP54
Long view of the manor fence BP54 on a dark brick wall along a landscaped garden
Street view of the residence with the manor fence BP54 and its entrance
Span of manor fence BP54 with a coat of arms at the centre and a gate beside it
Residential manor fence BP54 beside a paved drive and ornamental grasses
Forged manor entrance with the gate open between openwork towers, part of the BP54 set
Span of manor fence BP54 with a tall scrolled crest on a brick plinth

One set consists of two spans and an openwork post between them, seven metres (about 23 ft) long in total, with a riveted lattice running along the base and a coat of arms with initials at the centre.

The pattern is double-sided and the whole fence is hot-dip galvanized. It has a very classic look and suits houses, residences and villas.

A complete manor frontage

The photos show BP54 as part of a complete frontage. The fence runs on a wall of dark brick, with a crest of scrolls and finials above each span, a riveted lattice along the base and a coat of arms with initials at the centre. At the entrance stand two tall openwork towers with lantern-like tops, joined by an arched lattice canopy, and between them hang the driveway gate and a wicket in the same style. The dark bronze finish of the steel matches the brick, so the whole entrance reads as one piece of architecture.

Seven metres per set

One set of BP54 consists of two spans and an openwork post between them, seven metres (about 23 ft) in total. This module makes planning simple: the length of the frontage is divided into sets, and the posts fall at regular intervals, with the coat of arms in the middle of each span. The pattern is double-sided, so the garden side looks as finished as the street side, and every part is hot-dip galvanized before colouring.

Riveted lattice and a coat of arms

The riveted lattice along the base is made the traditional way, with bars crossing and joined by rivets rather than hidden welds, which gives the lower band texture and strength. The coat of arms is forged and assembled from separate parts and can carry the owners’ initials, a family crest or a date. Both details are typical of manor fences, which is why this design looks at home in front of symmetrical houses with a wide front and a central drive.

More examples of the manor style can be found in our range of forged fences.

See all wrought iron fences »